Table of Contents
Advertisement
05/2013
Use the enclosed small screwdriver to connect the lines and to avoid damaging the
!
device.
Connection lines to the TCS system
acceptable cross-section (diameter)
max. number of wires per terminal contact
Wiring diagram
Jumper must be
plugged if the de-
vice is installed at
the end of a BUS
video strand.
J1 is ON: If the
FVM1000 is installed
as the only or last
device at the end of a
BUS video strand.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 • Mail: hotline@tcsag.de
7
Connect the lines
0.08 ... 0.82 mm
each 2 x Ø 0.8 mm or 3 x Ø 0.6 mm
2
(Ø 0.32 ... 1.0 mm)
Subject to technical changes.
PI_FVM1000-0400_uk.doc
Version: 1
Advertisement
Table of Contents
