Indication And Operating Elements; Technical Data - TCS FVM1000 Product Information

05/2013
J1
matching
resistor
brightness
control
Labelling
LED, green:
indicates operational
readyness
LED, yellow:
indicates programming
mode
LED, red:
error indication
Reset button
button to reload the
factory settings WE
brightness control
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 • Mail: hotline@tcsag.de
connection termi-
nals video IN

Indication and operating elements

Function
• OFF: device is out of operation
• ON: operating voltage is on
• blinks: reload to factory settings
• OFF: not in programming mode, waiting for PIN input
• blinks: device is in programming mode, waiting for
command input
• blinks fast (for 3 s): incorrect input
• ON (for 3 s): positive input acknowledgement
• OFF: device is in stand-by mode, no error detected
• flashes: total error indication
• to reset the FVM1000
• to reload the factory settings of the FVM1000
• adjustable from -11 dB to +5 dB
from 0.28 Vss to 1.82 Vss (factory setting =1 Vss)

Technical data

5
button to reload
reset button factory settings
connection termi-
nals video OUT
indication for opera-
tion voltage, LED
green
indication programming
mode, LED yellow
error indication SD card
and TCS:BUS, LED red
slot for SD card
infrared receiver for
remote control
Subject to technical changes.
PI_FVM1000-0400_uk.doc Version: 1