Set The Encoding; Delete All Images - TCS FVM1000 Product Information

Set the encoding

Initiate the
programming
Enter
Encoding is set
Invalid value

Delete all images

Initiate the
programming
Enter
All images deleted
Incorrect entry, un-
known master code
Note: This process can take a few minutes.
*WE = factory setting
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 • Mail: hotline@tcsag.de
16
if not already realised
* 7 # value #
...
value
= 0 images are stored as BMP file
= 1 images are stored encoded
• A positive acknowledgement tone sounds,
the yellow LED lights up for 3 s
• the yellow LED blinks
A negative acknowledgement tone sounds
when pressing the #-button.
The yellow LED blinks fast for 3 s,
then blinks again
if not already realised
* 94 # master code # master code #
...
master code = number with 6 digits (unique
master code or master code ex works)
• A positive acknowledgement tone sounds,
the yellow LED lights up for 3 s
• then the yellow LED blinks
All images are deleted in the index on the SD
card
A negative acknowledgement tone sounds
when pressing the #-button.
the yellow LED blinks fast for 3 s,
then blinks again
(WE* = 1)
Subject to technical changes.
PI_FVM1000-0400_uk.doc
05/2013
Revision: 1