Advertisement
Legend
Press button until ...
Shortly press the button
Release the button
Allocating the output to a bell button that is not programmed
shortly
LED
press
blinks
Programming mode of the
system is switched ON
Allocating the output to a programmed bell button
shortly
LED
press
blinks
Delete the allocation to a bell button
shortly
LED
press
blinks
Programming mode of the system is
switched ON
Allocate the output to a BUS action
BRE2
press until
the LED lights up
1) The BRE2 returns into the operating mode after 30 s, the LED expires. If you want to cancel the programming at this
point, switch off the programming mode of the system at the BVS.
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
FAX: +49 (0) 41 94/ 9 88 129
Manual programming
BRE2
shortly press,
LED blinks
BRE2
shortly press,
press as long as Prog2 tone, light
LED blinks
switch tone and ring tone sound
(for 30 s)
at the front-door station, release
output is allocated to a bell button Programming mode of the
release
4
LED blinks slowly
LED is ON
|
further
shortly press,
1
ring tone sounds
Output is allocated to
a bell button
press until the delete
tone sounds, release
bell button deleted
within 30 s
press the door opener or
press floor push-button or...
execute required BUS action
period until ...
short
LED
press
is ON
Programming mode of the
system is switched OFF
shortly
LED
press
is ON
system is switched OFF
shortly
LED
press
is ON
Programming mode of the
system is switched OFF
shortly press,
LED is OFF
Output is allocated to
the BUS action.
Subject to technical changes.
PI_bre2eb_uk 1 A
02/2013
|
Advertisement
