Changing The Basic Settings; Cleaning; Cleaning Agents - Siemens HX9S5IH40Y Instruction Manual

Changing the basic settings

The function selector must be set to the "Off" position.
Press and hold the
v
1.
The first basic setting will appear on the display,
e.g. .
™‚ ‚
Use the or button to change the setting if
A @
2.
necessary.
Press the v button to confirm.
3.
The next basic setting will appear on the display.
Using the v button, continue going through all the
4.
basic settings as described above, changing the
settings if necessary using the
When you have finished, press and hold the
5.
button again for approx. 4 seconds to confirm the
v
settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Following a power failure, the basic factory
Note:
settings will be restored.
button for approx. 4 seconds.
or button.
A @
DCleaning
W ith good care and cleaning, your appliance will retain
C l e a n i n g
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.

Cleaning agents

Damage to the various different surfaces caused by
using the wrong cleaning agent can be avoided by
observing the following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or
■
stain remover,
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Zone Cleaning agent
Stainless steel sur- Hot soapy water:
faces* Clean with a dish cloth and dry with a soft
cloth. On stainless steel surfaces, always wipe
(depending on appli-
parallel to the natural grain. Otherwise, you
ance model)
may scratch the surface. Remove patches and
splashes of limescale, grease, starch and albu-
min (e.g. egg white) immediately. Corrosion
can form under such patches and splashes.
Special care products suitable for hot stainless
steel surfaces are available from our after-
sales service and from specialist retailers.
Apply a thin layer of care product with a soft
cloth.
Enamel, painted, plas- Hot soapy water:
tic and screen-printed Clean with a dish cloth and dry with a soft
surfaces* cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
(depending on appli-
ance model)
Control panel Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass scrap-
ers for cleaning.
* Optional (available for some appliances, depending on the appliance
model)

Cleaning

en
23