Table of Contents
Advertisement
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
Set the type of heating and temperature or setting.
1.
Touch the
button twice and use the
v
2.
to set the cooking time.
Touch the
button again.
v
3.
The end time
will be highlighted on the display.
y
Use the
or
button to delay the end time.
@
A
4.
The appliance will apply the settings after a few
seconds. The end time will be shown on the display.
Once the appliance starts, the time will begin counting
down.
On some appliances, the time counts down in the
background. You can use the
much time is left.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
or
A
@
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
button to set the end time all the
A
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
or
A
@
button to check how
v
button to
@
button to change the end time.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
button
To check the values for the different time-setting
options, touch the
required symbol is indicated.
Setting the timer
The timer runs alongside other settings.You can set it at
any time, even if the appliance has been switched off. It
has its own audible signal so that you can tell whether it
is the timer duration or a cooking time that has elapsed.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments.Above 10 minutes, the
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
Touch the
1.
highlighted.
Use the
2.
After a few seconds, the timer duration will start to
count down.
If the set timer duration is the duration for which
Tip:
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
all the way to zero. The timer is now switched off.
Checking time-setting options
If time-setting options have been set, the corresponding
symbols are lit up on the display. The symbol for which
the time is currently being displayed will be indicated.
To check the values for the different time-setting
options, touch the
required symbol is indicated.
Setting the time
When the appliance is connected to the power supply
or following a power failure, the time will flash on the
display. Set the clock.
The function selector must be set to the "Off" position.
Time-setting options
v
button repeatedly until the
button and 10 minutes if
A
button.
@
button until the timer symbol
v
or
button to set the timer duration.
A
@
or
button to change the timer
A
@
button to reset the timer duration
A
button repeatedly until the
v
en
is
V
21
Advertisement
Table of Contents
