Assembly - Proflex M5000 User Manual

M5000 Multi-Function Chin-Up Station

Assembly

The instructions may include fasteners that are pre-assembled to some parts – it may be necessary
to remove the fasteners in order to perform the assembly – always use the original fasteners.
Step 1
4 8
4 5
4 3
4
1. Attach the left side main upright (1) to the left base frame leg (2) and secure using 2 M10x45 bolts (3), 4
washers (4) (a washer under the bolt head, and a washer under the nut) and 2 nuts (5).
2. Attach a main upright support (6) to the base frame leg (2) using 2 M10x45 bolts (3), 4 washers (4) (a
washer under the bolt head, and a washer under the nut) and 2 nuts (5).
3. Attach the main upright support to the main upright (1) using 2 M10x75 bolts (7), 4 curved washers (8) (a
washer under the bolt head, and a washer under the nut) and 2 nuts (5).
4. Firmly tighten all fasteners.
5. Repeat the procedure for the right-hand main upright, base frame leg and remaining main upright
support.
E&OE
7 8
4 5
3
6
©2020 Proflex
1
2
5