Proflex M5000 User Manual page 8

M5000 Multi-Function Chin-Up Station
Step 4
19
20
1. Attach each arm pad (19) to each dip bar and secure using 2 M6x70 bolts (20).
2. Attach the upper stabiliser (21) to the dip bars and secure using 4 M10x40 bolts (22), 6 washers (4) (a
washer under each bolt head, and a washer under each nut) and 2 nuts (5).
23
24
3. Place the backrest bracket (23) over the upper stabiliser and secure it using 2 M6x25 bolts (24), inserted
from the rear of the upper stabiliser, and 1 M6x60 bolt (25), inserted from above and through the upper
stabiliser, and a nut (26).
4. Attach the backrest (27) to the backrest bracket using 2 M6x15 bolts (28).
E&OE
5
25
26
©2020 Proflex
21 13
22
4
28
27
4
8