Assembly; Rear Stabiliser 1 - Proflex M9000 User Manual

M9000 Multi-Function Home Gym

Assembly

The instructions may include fasteners that are pre-assembled to some parts – it may be necessary
to remove the fasteners to perform the assembly – always use the original fasteners. • Suitable tools
(not supplied) are required for assembly. • Check that all parts have been included before starting assembly.
• Ensure that there is adequate space for the equipment once assembled.
Step 1
1. Attach the rear stabiliser (03) to the base frame (01) and secure using 2 bolts (30), 4 washers (34) and 2
nuts (38).
2. Attach the 2 front stabilisers (04) to the base frame (01) and secure using 2 bolts (30), 4 washers (34)
and 2 nuts (38).
3. Attach the main support tube (02) to the base frame (01) and secure using 2 bolts (30), 4 washers (34)
and 2 nuts (38).
E&OE ©2017 Proflex 8