Proflex M5000 User Manual page 6

M5000 Multi-Function Chin-Up Station
Step 2
9
1. Attach the lower stabiliser (9) to left and right base frame / upright assemblies (X and Y) and secure
using 4 M10x75 bolts (7), 8 curved washers (8) (a washer under the bolt head, and a washer under the
nut) and 4 nuts (5). Do not tighten the fasteners at this stage.
2. Attach the mid stabiliser (10) to left and right base frame / upright assemblies (X and Y) and secure
using 4 M10x45 bolts (3), 4 washers (4) (a washer under the bolt head) and 4 nuts (5).
3. Firmly tighten all 8 fasteners.
E&OE
7 8
5
10
Y
X
©2020 Proflex
8 5
Y
X
3
4
6