Proflex M5000 User Manual page 7

M5000 Multi-Function Chin-Up Station
Step 3
1. Attach each dip bar (11) to each main upright and secure using 2 M10x20 bolts (12) and small washers
(13) (washer under the bolt head). Ensure to start both bolts into the threads before tightening – if you
insert and tighten one bolt before inserting the other bolt, it may be difficult to start the second bolt into
the threads.
15
2. Slide the chin-up bar supports (14) into the main uprights, with the hooked sections facing the same
direction as the dip bars. Adjust the height as required (ensure both supports are at the same height),
then secure using 2 height adjustment bolts (15) – firmly tighten the bolts by hand.
3. Place the chin-up bar (16) on top of the supports, with the ends of the bar sloping downward, and secure
using 2 M10x90 bolts (17) and 2 M10 plastic nuts (18) – firmly tighten the nuts by hand.
E&OE
11
12
13
14
©2020 Proflex
17
16
18
7