Proflex M5000 User Manual page 9

M5000 Multi-Function Chin-Up Station
Step 5
3
29
1. Attach the leg bar bracket (29) to the mid stabiliser, with the hooked portion facing toward the front of the
machine, and secure using 2 M10x45 bolts (3), washers (4) and nuts (5).
2. Attach the leg bar pad assembly (30) to the leg bar bracket – slide the bolt through the leg bar bracket at
a suitable position (there are several holes to choose from). Then secure it using the plastic nut (31).
Firmly tighten the nut by hand.
3. Attach the sit-up bench assembly (32) to the leg bar bracket and secure using 1 M10x60 bolt (33),
inserted through the lower hole in the bracket, and a nut (5).
The machine is now assembled. Use the sit-up bench pins to hold the bench in the folded position, or when
in use, to adjust the position of the bench support leg. If the floor surface where the machine is to be used is
hard and smooth, screw the suction feet (34) to the underside of the frame to help keep the machine stable.
E&OE
4
5
32
©2020 Proflex
31
33
34
30
5
9