INSTALLATION
Installation of Upper Door (Optional)
(See Figure 7)
NOTE: Before installing door on upper section,
remove breath protector and install polycarbonate
top panel.
NOTE: Only breath protector or upper door can be
installed on the top section, not both accessories at
the same time.
1. Remove one of the hinge pins from the door.
2. Insert side of door, with hinge pin installed, into
the hole located in the top corner of the door
opening. Make sure curve on door matches
curve on side glass.
3. Insert the previously removed hinge pin through
the hole on the other bracket at the top corner of
door opening, thread into door hinge and tighten.
Form No. GRCMWDHHIM-0907
Top Panel
Figure 7. Installing Upper Door
6
Hinge Pin