OPERATION
3. Place the On/Off rocker switch, located on the
left side of the unit, in the ON position. (See
Figure 9.) The halogen lights will glow at this time
and the electronic temperature controller will
display
"Stby."
temperature setpoints have been reached, the
control panel will display "rEdy" and the unit is
ready for use.
NOTE:
See
SETTING
TEMPERATURE CONTROL for adjusting the
temperature.
4. Fully raise door to load food pans into unit. Close
door when complete. (See Figure 10.)
Form No. GRCMWDHHIM-0907
When
the
programmed
THE
THERMOSTAT
Figure 9. On/Off Rocker Switch
Lift
Door
Figure 10. Door Operation
8
On/Off Rocker Switch