Warning means there is the possibility of personal injury to yourself or others. Caution means there is the possibility of damage to the unit. Your Hatco Glo-Ray Mini-Merchandiser is a product of extensive research and field testing. The materials used were selected for maximum durability, attractive appearance and optimum performance.
GRDW-2 The GRDW-2 features a metal sheathed heating element above and a thermostatically controlled heated base. The unit has a full front acrylic enclosure and comes equipped with a merchandising sign holder for impulse sales (sign not included).
SPECIFICATIONS ELECTRICAL RATING CHART - GRDW-2 Model Voltage GRDW-2 ELECTRICAL RATING CHART - GRKW-1 Model Voltage GRKW-1 Shaded areas pertain to Export Models Only. PLUG CONFIGURATIONS Units are supplied from the factory with an electrical cord and plug installed. Plugs are supplied according to the applications as shown in Figure 3.
4. Remove upper two screws from each side of unit. Install sign holder using original screws. Figure 4. Installing Legs Cap Nut Figure 5. Assembling - GRDW-2 INSTALLATION Sign Holder 5/8" Screw Form No. GRMM-0399...
NOTE: Hatco shatter-resistant light bulbs meet N.S.F. standards for food holding and display areas. For 120 Volt, 60 Watt applications, use Hatco part #02.30.043.00. For 220 and 240 Volt, 60 Watt applications, use Hatco part #02.30.058.00. WARNING Only light bulbs which meet or exceed N.S.F.
Hatco-authorized service agency for replace- ment or repair. Hatco reserves the right to accept or reject any such claim in whole or in part. Hatco will not accept the return of any Product without prior written approval from Hatco, and all such approved returns shall be made at Buyer’s sole expense.
Need help?
Do you have a question about the Glo-Ray GRDW-2 and is the answer not in the manual?
Questions and answers