Environment; Care Of The Product - PICO PicoScope 9000 Series Quick Start Manual

PicoScope 9000 Series Quick Start Guide

2.5 Environment

WARNING
To prevent injury or death, do not use in wet or damp conditions, or near explosive gas
or vapor.
CAUTION
To prevent damage, always use and store your oscilloscope in appropriate
environments, as specified below.
Temperature
Humidity (non-condensing)
Altitude
Pollution degree

2.6 Care of the product

The product contains no user-serviceable parts. Repair, servicing, and calibration require
specialized test equipment and must only be performed by Pico Technology or an approved
service provider. There may be a charge for these services unless covered by the Pico warranty.
WARNING
To prevent injury or death, do not use the product if it appears to be damaged in any
way, and stop use immediately if you are concerned by any abnormal operations.
CAUTION
Do not tamper with or disassemble the oscilloscope, connectors or accessories.
Internal damage will affect performance.
CAUTION
When cleaning the product, use a soft cloth and a solution of mild soap or detergent in
water. Do not allow water to enter the oscilloscope casing, as this will cause damage
to the electronics inside.
CAUTION
Do not block the air vents at the back or front of the instrument as overheating will
damage the oscilloscope.
CAUTION
Do not insert any objects through the air vents as internal interference will cause
damage to the oscilloscope.
CAUTION
To prevent dirt ingress, fit dust caps to all unmated connectors, and remove them only
during connection.
4 Copyright © 2008–2017 Pico Technology Ltd. All rights reserved.
Storage
–20 °C to +50 °C
≤ 95% RH
Operating
+5 °C to +35 °C
≤ 85% RH at 35 °C
2000 m
2
DO134-14