PicoScope 9000 Series Quick Start Guide
7.4 Adding measurements
Parameters
Statistics
Parameters
menu
1.
With the 500 MHz Clock waveform chosen, select Measure from the bottom menu bar.
2.
Select Parameters from the side menu.
3.
Select up to 10 defined parameters.
Note: The control layout is slightly different in the PicoScope 9000 software. Click one of the
category buttons such as X Parameters to reveal the list of measurements.
4.
View the results in the Measure area beneath the waveform.
5.
Select Statistics from the side menu for a wider numeric perspective.
6.
Resize the Measure area by selecting the min, mid, max, and auto tabs, which each display
different data sets.
12
Copyright © 2008–2017 Pico Technology Ltd. All rights reserved.
Measure
Measure
area
DO134-14