Configuring The Display - PICO PicoScope 9000 Series Quick Start Manual

7.5 Configuring the display
1. With the NRZ waveform chosen, select Display from the
bottom menu bar.
2. Select Var Color Grading from the side menu to adjust the
view of the waveform.
3. Click on the waveform and drag it to the left, as shown
below.
4. Set a faster timebase using the basic controls:
Channel
marker
OR
5. Click outside the waveform to drag out a zoom window.
6. Click within the zoom window to zoom. A second "B" timebase starts and is displayed.
7. To adjust its vertical position, click on the waveform and drag it up or down. To adjust the
vertical offset voltage, click on the channel marker (as shown above) and drag it up or down.
You have now covered the basic working principles of the scope software. For further detailed
information, see the User's Guide and the help files within the software.
DO134-14 Copyright © 2008–2017 Pico Technology Ltd. All rights reserved.
PicoScope 9000 Series Quick Start Guide
Var color
grading
13