Summary of Contents for Ballard Designs Tuscan File Hutch
Page 1
Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Tuscan File Hutch ITEM NUMBER: MO226 ASSEMBLED DIMENSIONS: 51 3/4” H x 36” W x 15” D PRODUCTS ARE NOT INTENDED IMPORTED FOR COMMERCIAL USE. UPDATED: 6-13-2019 Page 1 of 6...
TOOLS NEEDED: -Requires a screwdriver -Power drill suggested -Two person assembly suggested Remove all parts, hardware and protective packaging from carton and carefully arrange on a clean, level, padded surface. NOTE: To avoid accidentally discarding small parts or hardware, Glass Shelf (E) retain all carton contents until assembly and installation are complete.
Page 3
NOTE: Assemble in intended area for use. STEP 1: Place Shelf Supports (A) at desired height and gently place Glass Shelf (E) on Shelf Supports. STEP 2: Set and align Hutch on top of Console (sold separately). Attach together by positioning Connector Plates (C) evenly between the two and securing with Connector Screws (B).
Page 4
NOTE: Assemble in intended area for use. STEP 3: Plug electrical cord into an outlet. Cabinet is equipped with an “Easy Touch” dimmer control which allows for three levels of brightness. To operate, touch upper right hinge. Touch Door Hinge to control light Customer Service: 800-367-2810 Page 4 of 6...
Page 5
NOTE: Assemble in intended area for use. ANTI TIP INSTALLATION: Ltr. Qty. Hardware Included Small Screw Large Screw Bracket Retention Belt Attach a Bracket (H) to the back of the Hutch with the Small Screw (F) through the smaller hole. Screw the remaining Bracket (H) into a wall stud with the Large Screw (G) 2 inches below the Bracket attached to the furniture.
Page 6
NOTE: Save this page for future bulb replacement. HALOGEN BULB REPLACEMENT: Qty. Item needed Halogen JCD G8 120V 25W Replacement Bulb (A) NOT INCLUDED Unplug the unit from the wall. Remove the Lens Cover (B) from the Fixture Body (C) by turning it counter clockwise and pulling it away from the unit.