User Interface; Easy 4 - Wellis Olympus User Manual

EASY 4

COMPACT FULL-FUNCTION KEYPAD
The Quick Reference Card provides an overview of your hot tub's main functions and the operations accessible from your
digital keypad. This QRC depicts a generic overlay, custom versions may vary.
1 PUMP MODEL
HOT TUB FUNCTIONS
OFF MODE PUMP 1
Pressing Pump 1 for 5 seconds Press Pump 1 key to turn Pump
will enable the Off mode. This 1 on at low speed. Press a
mode allows you to stop all second time to turn pump to
outputs including automatic high speed (with a dual-speed
functions such as filter cycle, pump*). A third time turns
heat request and smart winter pump off. A built-in timer
mode for 30 minutes to perform automatically turns pump off
quick hot tub maintenance. after 20 minutes, unless pump
When Off mode is active, the has been manually deactivated
display will toggle between the first.
"OFF" message, the clock and
The "Pump 1" indicator
the water temperature.
lights up when Pump 1 is on.
The hot tub light will flash for With a dual-speed pump, the
a few seconds before the end indicator will flash when pump
of the 30 minutes to warn you 1 is on at low speed.
that the system is about to
resume its normal operation.
Press Pump 1 or Pump 2 (if
available) to restart the system
before the expiration of the 30
minute delay. When the system
resumes its normal operation,
the display shows "On" for 3
seconds.
* If single speed pump: press Pump key to turn pump on. Press Pump
key again to turn pump off.
USER INTERFACE - EASY 4
Pump 1
Light
Up
Indicator Down
lights
Pump 1 Pump 2 Up/Down
PUMP 2 KEY
Not available on all models
Press Pump 2 key to turn Pump
2 on at low speed. Press a
second time to turn pump to
high speed (with a dual-speed
pump*). A third time turns
pump off. A built-in timer
automatically turns pump off
after 20 minutes, unless pump
has been manually deactivated
first.
The "Pump 2" indicator lights
up when Pump 2 is on. With a
dual-speed pump, the indicator
will flash when pump 2 is on at
low speed.
Heater
Filter
Smart Winter Set Point
Mode
2 PUMP MODEL
Pump 1
Pump 2
Pump 1 Pump 2
Indicator
lights
LIGHT KEY
Press Light key to turn light on.
A second press turns light off.
A built-in timer automatically
turns light off after 2 hours,
unless it has been manually
deactivated first.
The "Light" indicator lights up
when light is on.
Light
Up/Down
Up / Down
UP/DOWN KEYS
Use Up or Down key to
set desired water temperature.
The temperature setting will
be displayed for 2 seconds to
confirm your new selection.
2 pump hot tubs have a
combined Up/Down key. Hold
the button to increase the pa-
rameter and release the button
to stop. Hold the button again
to decrease the parameter.
The "Set Point" icon indicates
that the display shows the
desired temperature, NOT the
current water temperature!
37