Selecting The Input Source; Adjusting The Display Format - Westinghouse SK-32H570D User Manual

BASIC OPERATION

4. SELECTING THE INPUT SOURCE

There are two ways to select the video input source.
Using the Individual Input Keys
Using the Input Key
► NOTE:
If you enable the Autosource function, the TV will automatically detect and switch to a new input
connection (e.g. The TV will automatically switch to PC mode when you connect to a computer.).
Go to page 43 for instructions on how to enable this function.

5. ADJUSTING THE DISPLAY FORMAT

The input source can sometimes affect the way images are displayed on-screen. You can adjust the display
format to view the image properly.
Press any of the following remote control keys to change the input source:
TV, DVD, PC, YPbPr, Video, or HDMI.
(1) Press Input.
(2) Press ▲/▼ to select the preferred source.
(3) Press to switch to the selected input source.
(1) Press .
(2) Press ▲/▼ to select the preferred display format. Options include:
・ Standard – Picture is displayed in its original size.
・ Fill – Picture is displayed to cover the entire screen.
・ Overscan – Picture is caled down to fit the display area.
(3) Press to apply the new display format.
24