Cable TV (CTV/DTV) Connection
The unit has a TV tuner (75 ohm coaxial cable connector) located on the right I/O panel for for easy cable
hookup. When connecting the 75 ohm coaxial cable to the unit, screw the 75 ohm cable to the TV tuner.
Some cable TV companies offer premium pay channels. Since the signals of these channels are scrambled, a
cable TV converter/descrambler is usually provided to the subscriber by the cable TV company. This converter/
descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4.
Typically one of these channels is used. If a channel is unknown, consult your cable TV company.) For more
specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing
the converter/descrambler provided by your cable TV company is explained below.
A position on the RF switch (not supplied): You can view all unscrambled channels by using the TV's
B position on the RF switch (not supplied): You can view the scrambled channels via the converter/
descrambler by using the converter's channel keys.