5�2�2 Orientation; 5�3 Installation In Pipes - IFM SD25 Series Operating Instructions Manual

5.2.2 Orientation
1
Fig� 1: Orientation of the pipe length and the unit
1: pipe length vertical, unit any
2: pipe length horizontal, unit vertical
3: pipe length right, unit on side
4: avoid: pipe length left, unit on side
5.3 Installation in pipes
► Fit the unit in the pipe in accordance with the flow direction (arrow on the unit):
IN
► Tighten both adapters in opposite direction by applying the defined tightening
torque:
18
2 3
4
OUT