Vitek Transcendent 5 Series Quick Start Manual page 10

Enable Face Detection
Click Config>Event>Face Detection to go to the Face Detection
Settings Interface. Check "Enable" to enable the function. For more
detailed settings / instructions, please refer to the use manual.
Temperature Measurement Settings
Click Config>Temperature>Temperature Measurement to go to the
temperature measurement settings interface.
1. Enable "Temperature Measurement", select Celcius or Farenheit
termperature as needed, then set the high and low temp. threshold.
2. Set the alarm
holding time and
the alarm trigger
options.
3. Click "Save" to
save the settings.
10