Table of Contents
Advertisement
VECTRIX VX-2 SERVICE MANUAL
SECTION B-6: CENTER STEP-THROUGH COVER
Preparations:
Disassemble Seat
see Section B-8
Unscrew the two PH2 Phillips screws (left and right
position)
Slightly press out left and right side of the cover so that
they can clear the frame
Carefully move the cover forward until the cover can easily
be removed
Side view of the inner backside cover
Remark: For assembling the Center Step-Through Cover,
please make sure the attachment points are in the correct
position and no edge is protruding. Insert the screws
slightly and if all screws and the fairing are in the correct
positions, tighten them fully.
Version 1.0/July 2011
VECTRIX, LLC
https://www.motorcycle-manual.com/
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VX-2 and is the answer not in the manual?
Questions and answers