Graco A Series Instructions-Parts List Manual page 27

Maximum working pressure
Maximum incoming air pressure
Minimum incoming air pressure
Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum recommended
pump speed
Air consumption
Air inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fluid inlet
Fluid outlet
Maximum Fluid Temperature (Model 222-390)
Sound level at 95 psi, 25 cycles per minute (Model 222-390)
Sound power level at 95 psi, 25 cycles per minute (Model 222-390)
Weight (Model 222-390)
Wetted parts
PTFE
Manual Change Summary
Summary
This manual was changed from Revision G to Revision J to make changes to air/fluid regulator parts for the pail
mount system. See Page 19. The spray gun is changed for both pail mount and wall mount systems. See pages18
and 20. A grounding wire is added to the pail mount system. See page 18.
Model 224–704 is obsolete and has been removed from this publication.
Technical Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . Pump: 316, 440, and 17-4 PH Stainless Steel, Chrome Plating,
PTFE, Ultra–High Molecular Weight Polyethylene, Viton
Intake Tube (Model 222-393): 304 and 316 Stainless Steel, Nylon
and Viton is a registered trademark
66 bar, 6.6 MPa (950 psi)
6.5 bar, 0.65 MPa (95 psi)
1.7 bar, 0.17MPa (25 psi)
100 cpm (1.5 liters/min [0.4 gpm])
See Performance Chart on page 26
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
Intake Nipple (Model 222-390): 304 Stainless Steel
10:1
1/4 npsm(f) swivel
3/8 npt(f)
3/8 npt(f)
49 C (120 F)
69 dBa
75 dBa
12.7 kgs (28 lbs)
Hoses: Nylon