modway EEI-2803 Assembly Instructions page 3

EEI-2803/2804 BAR TABLE
STEP 3:
1. Place Stretcher (4) to the assembled Table Top (2) and Table Legs (3) as shown.
2. Insert 8 pieces of Bolts (B) with 8 pieces of Flat Washers (G) into the holes on Table Legs (3) through the
holes on Stretcher (4).
3. Use Allen Wrench (H) to tighten all Bolts (B) clockwise until secure.
STEP 4:
1. Secure 4 pieces of Nuts (E), 4 pieces of Spring Washers (D) and 4 pieces of Flat Washers (C) to the other
end of assembled Double-End Bolts (A) as shown.
2. Use Wrench (F) to tighten all Nuts (E) clockwise until secure.
Customer Service 609-256-9000︱www.modway.com
Page 3 of 4