Table of Contents
Advertisement
Checking drive chain tension
Important
Have chain tension adjusted by a Ducati Dealer
or authorised Service Centre.
Make the rear wheel turn until you find the position
where chain is tightest. Set the motorcycle on the
side stand. With just a finger, push down the chain at
the point of measurement and release. Measure the
distance (A) between the centre of the chain pins and
the aluminium section of the swinging arm. It must
be: A = 69 ÷ 71 mm (2.72 ÷ 2.79 in).
Important
This only applies to the motorcycle STANDARD
settings, available upon delivery.
244
A
Fig 202
Advertisement
Table of Contents
