Table of Contents
Advertisement
DRL (Daytime Running Light) in AUTO mode –
only for version with DRL lights
If the DRL was set to AUTO via the setting menu, the
instrument panel automatically manages (according
to detected ambient light) the DRL and the low
beam:
-
if the instrument panel detects good light
conditions (day) the DRL is turned on and the
low beam is turned off;
-
if the instrument panel detects poor light
conditions (night) the DRL is turned off and the
low beam is turned on.
In this mode, the instrument panel automatically
switches from DRL to low beam and vice versa,
depending on detected ambient light. When the
DRL is set to AUTO mode, the display shows the
warning light (A).
188
40
°C
0
TOURING
km/h
A
5260
TOT
km
A
Attention
Using the DRL light in AUTO (automatic) mode
in case of poor light conditions, especially in case of
fog or clouds, could impair safety: in this case
DUCATI recommends to manually activate the low
beam.
If the DRL was set to AUTO mode via the setting
menu, press button (5) to disable that mode and set
a "normal" light management. Press again button (5)
to re-enable DRL but with control strategy set to
MANUAL.
10:34
AM
8
7
9
6
10
5
N
11
Gear
4
3
DQS
U/D
DTC 5
2
1
ABS 1
DWC
1
RPM X 1000
5
Fig 148
Advertisement
Table of Contents
