Advertisement
TROUBLE SHOOTING
PROBLEM
DISTRIBUTORS WILL NOT TURN
FERTILIZER RATE VARIES
SOWING DEPTH DIFFERS FROM ONE
SIDE OF THE MACHINE TO THE OTHER
DISTRIBUTOR ROLLERS DAMAGE SEED Gate positions are set too close
IMPLEMENT KEEPS DROPPING SEED
AND FERTILIZER WHEN IN THE
TRANSPORT POSITION
SOWING RATE UNEVEN ACROSS
GRAIN AND FERTILIZER BOX
CAUSE
Clutch not engaged (if trailing hitch kit fitted)
Gearbox not engaged
Gearbox shear pins broken
Secondary shaft shear pins broken
Fertiliser build-up on distributors
Ram lug assembly not adjusted properly
Hydraulic cylinders out of phase (if trailing
hitch kit fitted)
Gate settings too wide
Gate settings in cleaning out position
Gate setting is unequal across box
38 38
REMEDY
Check clutch
Check gearbox
Replace
Replace
Clean distributor rollers
Check ram lug assembly and adjust if
necessary
Re-phase cylinders (see page 31)
Re-adjust gate settings
Re-adjust gates to recommended setting
Re-adjust gates to recommended setting
05.19M142J3
Advertisement
