Advertisement
5. Check all hydraulic hoses periodically for signs of ruptures
and leaks. Always use wood or cardboard as a backstop,
and wear gloves and eye protection when searching the
hydraulic system for leaks. Spurting hydraulic fluid can
cause injury if it penetrates the skin or the eyes. If injured
by escaping hydraulic fluid, see a medical doctor
immediately.
6. Always permit parts, which contain hot fluid to cool to a
safe temperature before handling or disconnecting these
parts.
7. Always wear safety glasses or goggles and gloves when
working on the hydraulic system.
8. Tank must be pressurised to maintain an accurate
metering rate. Air leaks around the lid seals and the seed
cup can cause uneven distribution.
9. Be aware of worn or ruptured electric wires, a short circuit
of the electricity may cause fire and certain injury to people
who touched it.
10. When performing maintenance work on the fan, be sure
tractor engine is shut off to prevent the fan from being
accidentally operated. If the fan was accidentally operated,
serious injury or death could occur to the person(s)
performing maintenance.
ASSEMBLY SAFETY
1. Use an aligning punch to line up holes. Keep your fingers
out of these holes. Any sudden movements of heavy
components will severely injure or sever your fingers.
2. Be sure all bolts and hydraulic fittings are tight, and all cotter
pins are installed in their pins.
3. Use extra care when assembling guard-rail and hand-rail on
tank platform. The person assembling railing may fall from the
platform when no guardrail is in place.
4. Platform and ladder will be slippery if wet or muddy. Serious
injury could result if you fell from the air seeder platform or
ladder.
5. Be sure all wheel bolts are checked for tightness during initial
transport or when first air seeding. Loose wheel bolts may
result in the wheel falling off causing serious damage to the
air seeder and may cause serious injury to the operator or
persons nearby.
6. When replacing main wheels, make sure the tyre size is
400/60-15.5. The allowed load is over 2900kg per tyre. Be
aware of the correct side and the pattern of the tyre. Check
the tyre pressure before operate.
7. When replacing wing wheels, make sure the tyre size is
215/85-16. Be aware of the correct side of the tyre. Check the
tyre pressure before operate.
8. Wear gloves, heavy clothing and heavy footwear when
assembling the air package and seed boots. Points and sharp
corners of cultivator can cause injury.
9. Do not walk across the top of cultivator frame when
assembling air package. Serious injury could result if you fell.
11 11
05.19M142J3
Advertisement
