Advertisement
4. When transporting the air seeder with the wings folded
(up), be sure there is sufficient clearance of the road, the
overall transport width of the machine is 2.97m. Check
local road regulation for the allowance.
5. During the transport, DO NOT travel over 30 km/hr. Over
speed can result in losing control of the airseeder, damage
to the tyres and bearings of the airseeder and high risk of a
traffic accident.
6. Take extra care when transport with hopper fully filled.
7. Before the transport, check the necessity to open the light
kit according to local road regulation.
8. Always make sure lock the wings in the folded position with
the transport locks before transporting the air seeder. Serious
damage to the cultivator and serious injury or death could
result from the wings falling during transport.
9. Regulate your speed on hillsides and curves when
transporting the cultivator and air seeder. Loss of tractor
control could result in serious damage to the air seeder and
possible serious injury or death to you or those nearby.
10. Be sure no one is standing near air seeder when hitching air
seeder and tractor. Severe injury or death could occur if a
person(s) nearby were struck or caught by the air seeder.
MAINTENANCE SAFETY
1. Always put all tractor controls in neutral set the parking brake
and shut off the engine before servicing the air seeder. If
tractor and air seeder were to roll, you could be seriously or
fatally injured.
2. Do NOT enter tank of air seeder AT ALL TIMES. The tank is
NOT designed for people to come in; cleaning is available
through lower hopper door. You would have difficulty getting
out and may hurt yourself from falling through the top hopper
door.
3. Do not lubricate the air seeder when it is in motion. You may
fall and be seriously or fatally injured.
4. Do not loosen or disassemble hydraulic components when
there is pressure within those components. Escaping
hydraulic fluid under pressure has sufficient force to penetrate
skin. Always relieve the pressure in the hydraulic system
before making adjustments to the hydraulic system.
10 10
05.19M142J3
Advertisement
