Advertisement
SEEDING FLOW
Seed and fertilisers stored in each compartment go through
the hopper gate to the seed cup where the sowing rate is
controlled. The components from both hoppers will be mixed
in the first distributor.
The mixture is sown to the riser and distributor heads by the
air from the blower. In the default setting, both distributor
heads contain the same mixture.
For dual seeding kits, seed and fertilisers will not be mixed
and will be sent to risers separately. Each distributor head
sows different components.
TO GET AN ACCURATE CALIBRATION RESULT, A
PRERUN CALIBRATION TEST CAN HELP FILL UP THE
GAPS AND CLEAN UP ANY REMAINING SEEDS IN THE
PAST.
GATE SETTING
In the seed cup, seed and fertiliser metering rollers have
adjustable gates at the metering point under the roller. This
adjustment allows for the diversity in size of seed and types of
fertiliser. To ensure accurate metering of material, it is essential
that these gates be correctly adjusted in accordance.
14 14
05.19M142J3
Advertisement
