Advertisement
DOUBLE DISC OPENERS
DOWN PRESSURE
For best results, set the pressure only enough to ensure
adequate penetration. Packing pressure for use in the soft
ground should be much lower than for hard ground.
To adjust, turn the bolt as shown below to increase or
decrease the spring pressure as required. Increasing spring
pressure will increase the downward pressure on the
opener/press wheel.
TURNING
Lift the disc clear of the ground when turning to avoid damage.
SAFETY FIRST
DO NOT OPERATE THE IMPLEMENT WITH CHAIN DRIVE
GUARDS REMOVED.
DO NOT ATTEMPT ANY WORK ON THE IMPLEMENT WHILE
THE IMPLEMENT IS IN MOTION. (I.E. CLEANING OF BOXES
OR LUBRICATION OF DRIVES ETC.).
PRIOR TO WORKING UNDERNEATH THE IMPLEMENT (E.G.
CHANGING POINTS, ETC.) ALWAYS CHECK THAT THE
IMPLEMENT IS ADEQUATELY SUPPORTED ON BLOCKS.
17 17
05.19M142J3
Advertisement
