Appendix H Hazardous Area Certification; Product Standards; Product Certification; Global Certificates/Approvals - Michell Instruments Liquidew EExd User Manual

Liquidew EExd User's Manual
Appendix H Hazardous Area Certification
The Liquidew EExd is certified compliant to the ATEX Directive (2014/34/EU) and IECEx
for use within Zone 1 and Zone 2 Hazardous Areas and has been assessed so by
ELEMENT ROTTERDAM BV (Notified Body 2812).
The Liquidew EExd is certified compliant to North American Standards (USA and Canada)
for use within Class I, Division 1, Groups B, C and D Hazardous Locations and has been
assessed so by CSA.
H.1

Product Standards

This product conforms to the Standards:
EN60079-0:2012/A11:2013
EN60079-1:2014
C22.2 No. 142-M1987
C22.2 No. 30-M1986
H.2

Product Certification

This product is attributed with the product certification code:
ATEX
II2G Exd IIB + H2 Gb T5 (Tamb -40°C to +44°C)
T4 (Tamb -40°C to +60°C)
IECEX
Exd IIB + H2 Gb T5 (Tamb -40°C to +44°C)
T4 (Tamb -40°C to +60°C)
cCSAus
Class I, Division 1, Groups B, C & D T5 (Tamb -40°C to +44°C)
T4 (Tamb -40°C to +60°C)
H.3

Global Certificates/Approvals

ATEX
IECEx
cCSAus
These certificates can be viewed or downloaded from our website at:
http://www.michell.com
!
Michell Instruments
TRAC11ATEX21322X
TRC 11.0012X
1701657
Special attention should be paid to the Special Conditions
for Safe Use and the Conditions of Certification listed in the
certificates shown on our website.
IEC60079-0:2011
IEC60079-1:2007
UL508
UL1203
APPENDIX H
75