Michell Instruments Liquidew EExd User Manual page 51

Liquidew EExd User's Manual
Variable: DATE
Adjustable Range/Options:
Description: The date. Format: ddmmyy. To adjust the day, highlight the
INST ADDR
Variable:
Adjustable Range/Options:
Description: Unique instrument address for networking. This address is used by the
SET DEFAULT
Variable:
Adjustable Range/Options:
Description: Sets instrument to default configuration. The default values for all the
Variable: LOG INT'VAL
Adjustable Range/Options:
Description: Sets the interval between the logged data readings.
RESET LOG
Variable:
Adjustable Range/Options:
Description: Resets the logging statistics so that the variation in measurements can be
Michell Instruments
Day: 01-31, Month: 01-12, Year: 00-99
SELECT d
press (a ' ' should appear to the right of the year value). Use the
Up Down (
() or ) buttons to adjust. To adjust the month and year,
press SELECT again (an '
Up Down (
Use the () or
changes, the year field will change accordingly and automatically. Press
SELECT to finish.
01 to 31
Modbus protocol to specify the location of the Liquidew EExd instrument
in the network.
NONE
variables and parameters are set. To initiate, select the variable and then
Up
press either the () or
10 to 60 in intervals of 10 minutes
select, done
recorded from a user-defined start point. When the
is highlighted press the
done .
m ' should appear to the right of the year value).
) buttons to adjust the month. As the month
Down (
) button.
SELECT button - the option will go from
APPENDIX B
DATE field,
RESET LOG variable
select to
43