Front Cover - Sony Ericsson V640i Working Instruction, Mechanical

4.1.4 Front Cover

C
LEAN ANY DUST OR MARKS FROM FRONT COVER WINDOW
LCD
BEFORE PROCEEDING WITH NEXT STEP
1. Place Front Cover into top position first.
2. Lower bottom end of Front Cover onto PCBA & Back
Cover Assy.
Press down on phone to secure snap hooks as shown in
picture.
Press down to secure snap hooks at bottom end of phone
then check Keypad that all buttons are functioning.
T
IGHTEN THE SCREWS ACCORDING TO THE SCREWING
SEQUENCE SHOWN BY THE NUMBERS IN THE PICTURE
Use 22NCM torque pressure to tighten all four screws using
torx bit no.6.
3/000 21-1/FEA 209 544/133 A
©
Company Internal Sony Ericsson Mobile Communications AB
&
!
.
!
Working Instruction, Mechanical
34(38)