The power of the laser c an be dis tr ibuted evenly
t o a n y l o c a t i o n o n t h e w o r k i n g a r e a a f t e r t h e
adjustment s above. The per formance should meet
the needs of regular operation. Please run "Camera
Calibration" again after the optical adjustment. If the
ver ticality of the optical path is required in specific
applications, the steps below can be carried out for
advanced adjustments.
7.6.5 Ver tic alit y of t he Optic al Pat h (Advanced
Adjustment)
Goal: Both dot s on the lens holder and the laser
beam outlet be on the center of the circle.
Directions:
1
Move the laser head to the center of working area
manually. Place a piece of tape on the metal ring in
front of the third reflecting mirror.
2
Close the door and press "Laser Pulse".
73