Flux Beambox User Manual page 13

3
Clean out leftover bits inside the unit when it builds
up.
4
Never leave the unit unattended while operating
always stay within sight. Look inside frequently.
5
If there is a lasting flame inside the unit that does not
extinguish when the laser has moved past. Turn off the
machine and pull the plug on the back of the unit.
6
If it is safe to do so, extinguish the fire with a wet
towel. Note that water may damage the machine.
7
Extinguish the fire with a fire extinguisher. Note that
fire extinguishers may cause damage to the machine.
8
If the fire cannot be extinguished or if it spreads
outside the machine, call your local emergency number
Smoke and Fume Safety
1
When exhausting outdoors, be sure that the exhaust
location won't be bothersome to neighbors or passers-by,
and don't forget to check local air quality regulations that
may apply.
2
If a strong, sharp smell that also causes eyes, nose,
or throat irritation, is detected, or visible smoke escaping
while the lid is closed, stop immediately and re-check your
exhaust setup.
13