Fancom INTELLITEK Manual page 22

IntelliTek
The system automatically generates device messages if there is a fault. The alarm button becomes red as soon
as there are device messages. The message is deleted automatically as soon as the fault has been remedied.
You can view the list of device messages as follows:
1. Click the alarm button at the bottom of the screen.
The following screen "Device alarm messages" appears:

error code = specific code of the error that occurs that's helps service for troubleshooting

Message = Text that explaining the alarm regarding what happened where

Date / Time = Point of time the error occurs
Device messages must be heeded immediately and any faults that have occurred must be
remedied immediately. Trouble-free operation of the IntelliTek system cannot be assured if
there are any current device messages.
The alarm message can be ignored by click the button "Ignore". Ignored device-messages will
be removed from the list "device alarm messages"- but will appear again latest at the start of
the next feed-period if not solved.
Device alarm
19