Fancom INTELLITEK Manual page 10

IntelliTek
Click settings, choose Stadium
screen appears:
At this screen you can define the valid "stadium" and range of "stadium-days" for the sows that are entering the
gestation area by this section. In addition to that, you can define the "stadium" and "stadium-day" for the sows that
appears at the IntelliTek station without a valid stadium / stadium-day.
It is recommended that the user is setting the stadium and stadium-day of each individual sow (at the PC or
MILAN Touch Handheld) before the sow enters the gestation area (IntelliTek stations). However, if the user is not
setting a valid "Stadium" and "Stadium-day" for a sow, the system will automatically assign the set "default" values
of this screen. The "default" stadium can also be set to stadium = "unknown" – in that case the user can realize
very easily that this stadium was assigned to the sow automatically by the system (not manually) and needs to be
checked / corrected!
Example 1: The user knows that in this section are only pregnant sows (never empty sows) and he's
moving the sows normally 5 days after insemination into the gestation area (IntelliTek stations); but
always between the 3rd and 21st day. He intends to always set the insemination date of the sows
before he moves them into the gestation area. In that case he should set the configuration as follows:

Valid range of stadium-days for empty sows: "0 ... 0"
-> a sow with stadium = "empty" will be set always on "default value" (unknown / 5)

Valid range of stadium-days for pregnant sows: "3 ... 21"
-> a pregnant sow with a stadium-day out of this range will be set on "default value" (unknown / 5)

Default value if stadium is not valid: "unknown / 5"
Customer can realize very easy if he forgot to enter a stadium (or entered a wrong stadium by mistake)
prior moving a sow to the gestation area. He just has to look for sows with a stadium = "unknown". He
can correct the stadium of these sows at the PC or MILAN Touch Handheld.
and click the button at the Header
Configuring basic settings
"individual (dynamic group)"; the following
7