Epson WF-7840 Series User Manual page 375

Administrator Information
Items
Subaddress (SUB/SEP)
Password (SID/PWD)
Email
Email Address
Network Folder (SMB)
Save to
User Name
Password
FTP
Save to
User Name
Password
Connection Mode
Port Number
Registering Destinations as a Group Using Web Config
If the destination type is set to Fax or Email, you can register the destinations as a group.
1. Access Web Config and select the Scan/Copy or Fax tab > Contacts.
2. Select the number that you want to register, and then click Edit.
3. Select a group from Type.
4. Click Select for Contact(s) for Group.
The available destinations are displayed.
>
Settings to Use the Printer
Set the sub address that is appended when fax is sent. Enter within 20 characters
or less using 0-9, *, # or spaces. If you do not specify this, leave it blank.
Set the password for the sub address. Enter within 20 characters or less using 0-9,
*, # or spaces. If you do not specify this, leave it blank.
Enter between 1 and 255 characters using A-Z a-z 0-9 ! # $ % & ' * + - . / = ? ^ _ { | }
~ @.
\\"Folder path"
Enter the location where the target folder is located between 1 and 253 characters
in Unicode (UTF-8), omitting "\\".
Enter a user name to access a network folder in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter a password to access a network folder in 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F).
Enter the server name between 1 and 253 characters in ASCII (0x20-0x7E),
omitting "ftp://".
Enter a user name to access an FTP server in 30 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If the server
allows anonymous connections, enter a user name such as Anonymous and FTP. If
you do not specify this, leave it blank.
Enter a password to access to an FTP server within 20 characters or less in Unicode
(UTF-8). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not
specify this, leave it blank.
Select the connection mode from the menu. If a firewall is set between the printer
and the FTP server, select Passive Mode.
Enter the FTP server port number between 1 and 65535.
375
>
Making Contacts Available
Settings and Explanation