Installation Requirements; Location Requirements - Dacor DOB30M977 Series Installation Instructions Manual

Installation requirements

Location requirements

Observe all governing ordinances
IMPORTANT:
Specified cutout dimensions are minimums and must be used.
•
The cabinet recess must completely enclose all but the face of the oven.
•
A grounded electrical supply is required. (See Electrical Requirements.)
•
Put the electrical-supply junction box at most 3" (7.6 cm) below the support platform.
•
Drill a 1" (2.5 cm) min. diameter hole in the right-/left-rear corner of the support
•
platform for conduit access to the junction box.
NOTE
For under-counter installation, the junction box should be in the adjacent right/left
cabinet. For rear-wall installation, the junction box should be recessed in the upper-
right corner of the cutout.
• The support platform must be solid, level, and flush with bottom of cabinet cutout.
• Single oven: The floor must support 221 lb (100 Kg).
• Install the oven at least 12" (30 cm) from other appliances.
IMPORTANT: Verify with your builder or cabinet supplier that the materials used will not
discolor, delaminate, or sustain other damage. This oven complies with UL and CSA
International requirements, and the max. allowable wood-cabinet temp. of 194 °F (90 °C).
6 English
.