Electrical Connection - Dacor DOB30M977 Series Installation Instructions Manual

Electrical connection

WARNING
Electrical Shock Hazard
• Disconnect power before servicing.
• Use 8-gauge solid copper wire.
• Ground the oven.
• Failure to follow these instructions can result in fire, electrical shock, or death.
This oven is manufactured with a neutral (white) power-supply wire and a cabinet-
connected ground (green or bare) wire twisted together.
UL-listed or
CSA-
approved
conduit
connector
Electrical Connection Options Chart
If your home has:
4-wire
3-wire
18
English
1.
2.
3.
4.
5.
6.
7.
4-Wire Cable from Home Power Supply
1/2"
1.3 cm
3-Wire Cable from Home Power Supply
1/2"
1.3 cm
Disconnect power.
Feed the oven's conduit through the
opening in the cabinet.
Remove the junction-box cover.
Install a UL-listed or CSA-approved
conduit connector on the junction box.
Route the oven conduit through the
connector into the junction box.
Tighten the conduit connector screws.
See the Electrical Connection Options
Chart to complete installation for your
type of electrical connection.
Go to section: