Advertisement
ASSEMBLY INSTRUCTIONS
Thank you for purchasing a quality select hardwood rocking chair. Your chair comes with a rich heritage and will become a
treasured family heirloom. If you should have any comments or questions please call the toll-free number below between 8:00
AM and 5:00 PM CST Monday through Friday. Again, we appreciate your business and hope you get many years of enjoyment
from this chair.
NOTICE: The Rocking Chair product that you have purchased requires some assembly. As with all furniture,
proper assembly is necessary for the safe and comfortable use of your rocker. Hinkle Chair Company cannot be responsible
for any damage or injury that results from improper assembly of the chair. Please read and follow these instructions
carefully and in sequence. If you have any questions please call (800) 251-3025 and one of our helpful representative
will be happy to help you.
PLEASE NOTE: The Rocker you have purchased is depicted above. Many of our rockers assemble with the exact same
steps and the only difference is the appearance of the chair. If the rocker depicted in the assembly steps does not look
the chair you purchased, it assembles with the same steps. Also, all references of left and right in these instructions are
from the perspective of standing in front of the chair facing it, not siting in it.
#700 SLAT ROCKER
Advertisement
Table of Contents
Related Manuals for Hinkle Chair Company 700 SLAT ROCKER
Summary of Contents for Hinkle Chair Company 700 SLAT ROCKER
- Page 1 NOTICE: The Rocking Chair product that you have purchased requires some assembly. As with all furniture, proper assembly is necessary for the safe and comfortable use of your rocker. Hinkle Chair Company cannot be responsible for any damage or injury that results from improper assembly of the chair. Please read and follow these instructions carefully and in sequence.
- Page 2 ROCKING CHAIR ASSEMBLY INSTRUCTIONS *NOTE: ASSEMBLY IS MUCH EASIER WITH TWO PEOPLE D-R/L PARTS INCLUDED: 1 – Chair Back (A) 10 – Wooden Buttons (F) 1 – Chair Seat (B) 10 – Hex Head Bolt w/wrench (F) 1 – Back Spindles (C-1) Round 4 –...
- Page 3 ** Attention/Stop** Hinkle Chair Company has made every effort to provide you with a ready-to- assemble product that has the same quality as our fully assembled rocking chairs. In the unlikely event that there are incorrect, missing parts, or the...
- Page 4 STEP 1: __________________________________________ ______________________________________________ Place right side of Back (A) on cardboard shipping box with holes Once orientation is establish, expose the pre- drilled holes facing up. Place Side (D-R) over the pre-drilled holes to verify and insert a Hex Head Bolt (F). Thread into the the orientation of the back.
- Page 5 STEP 3:________________________________________________________________________________________ Lay Right side of rocker (D-R) on the box. Insert the two Front Insert Back Spindle into pre-drilled in Rocker side (D-R) and spindles with the corresponding pre-drilled holes. Tap with a hammer tap in until it bottoms out. until it bottoms out in the per-drilled hole.
- Page 6 STEP 5:____________________________________________________ _____________ _______________________ Note: when choosing the Runner, the pre-drilled Tap nails provided into the predrilled hole until flush with the holes go to the inside of the rocker. urface of the Runner (E). Repeat for other three holes Place the mortised hole on Runner (E) over the tenon on the Fig.
- Page 7 CARE TIPS LISTED BELOW ARE SOME TIPS TO HELP KEEP YOUR FURNITURE LOOKING NEW. To preserve the finish on stained or pure white furniture it is highly recommended that they either be placed indoors or in a protected environment such as a covered porch. In any case the finish will last longer and look better if kept out of direct sunlight and blowing rain.
Need help?
Do you have a question about the 700 SLAT ROCKER and is the answer not in the manual?
Questions and answers