Table of Contents
Advertisement
Quick Links
240 SLAT PORCH ROCKER
ASSEMBLY INSTRUCTIONS
Thank you for purchasing a quality select hardwood rocking chair. Your chair comes with a rich heritage and will become a
treasured family heirloom. If you should have any comments or questions please call the toll-free number below between 8:00
AM and 5:00 PM CST Monday through Friday. Again, we appreciate your business and hope you get many years of enjoyment
from this chair.
NOTICE: The Rocking Chair product that you have purchased requires some assembly. As with all furniture,
proper assembly is necessary for the safe and comfortable use of your rocker. Hinkle Chair Company cannot be responsible
for any damage or injury that results from improper assembly of the chair. Please read and follow these instructions
carefully and in sequence. If you have any questions please call (800) 251-3025 and one of our helpful representative
will be happy to help you.
Advertisement
Table of Contents
Related Manuals for Hinkle Chair Company SLAT PORCH ROCKER 240
Summary of Contents for Hinkle Chair Company SLAT PORCH ROCKER 240
- Page 1 NOTICE: The Rocking Chair product that you have purchased requires some assembly. As with all furniture, proper assembly is necessary for the safe and comfortable use of your rocker. Hinkle Chair Company cannot be responsible for any damage or injury that results from improper assembly of the chair. Please read and follow these instructions carefully and in sequence.
- Page 2 ROCKING CHAIR ASSEMBLY INSTRUCTIONS D-L/R C-2 C-1 PARTS INCLUDED: 1 – Chair Back (A) 8 – Wooden Buttons (F) 1 – Chair Seat (B) 8 – Hex Head Bolt w/wrench (F) 1 – Back Spindles (C-1) Round 4 – Runner Nails (F) 2 –...
- Page 3 ** Attention/Stop** Hinkle Chair Company has made every effort to provide you with a ready-to- assemble product that has the same quality as our fully assembled rocking chairs. In the unlikely event that there are incorrect, missing parts, or the...
- Page 4 STEP 1: __________________________________________ ______________________________________________ Place right side of rocker D-R on cardboard shipping box with mortised Once orientation is establish, flip over to expose the pre- holes facing up. Place Back (A) over the pre-drilled holes to verify drilled holes and insert a Hex Head Bolt (F). Thread into the the orientation of the back.
- Page 5 STEP 3:________________________________________________________________________________________ Place left side of rocker (D-L) over the partially assemble chair. Insert Hex Bolt (F) into pre-drilled in Rocker side (D-L) and Line up the spindles with the corresponding mortises. Tap with thread in half way as on other side. Repeat for the lower hole. a hammer until the left side is all of the way on the tenons.
- Page 6 STEP 5: _________________________________________________________________________________________ Place the Hex Screw in the pre-drilled hole on the lower part of the Repeat for the other side. Fig. 10 front post. Note: This does not have a threaded insert and can be stripped out if tightened too tight. Fig. 9 Fig.
- Page 7 CARE TIPS LISTED BELOW ARE SOME TIPS TO HELP KEEP YOUR FURNITURE LOOKING NEW. To preserve the finish on stained or pure white furniture it is highly recommended that they either be placed indoors or in a protected environment such as a covered porch. In any case the finish will last longer and look better if kept out of direct sunlight and blowing rain.
Need help?
Do you have a question about the SLAT PORCH ROCKER 240 and is the answer not in the manual?
Questions and answers