1.10
Industrial printer: B-EX6T1 / B-EX6T3
a) '0.1 km counter' reading
1. Press the [MODE] key as you switch on the printer.
Release the keys when SYSTEM Mode appears on the display.
2. Press the arrow under the cursor key to select the menu item
<1> DIAGNOSTIC.
3.
Use the cursor keys to select the print type:
Print with colour ribbon (THERMAL TRANSFER)
Print with no colour ribbon (DIRECT THERMAL)
Show counter readings on the printer's display (DISPLAY).
Confirm by pressing the ENTER key.
Confirm by pressing the ENTER key.
PRINT TYPE will open
Menu.
Page 17