Technical Annex; Snmp/Mib Commands - Toshiba B-EP2 Counter Reading Manual

4. Technical annex

If you would like to integrate counter readings for label printers into your network
management software, you have the option of the following MIB commands and trap
specifications.
4.1.

SNMP/MIB commands

This is an excerpt from the SNMP specification for label printers
th
15 edition: 14 November 2016:
The following printer models can be equipped with SNMP/MIB support.
B-EP2
B-EP4
B-FP3D (SNMP v1/v2c)
B-EV4
B-FV4
B-SA4
B-850-R
B-SX4T
B-SX5T
B-SX6T
B-SX8T
B-EX4T
B-EX4D
B-EX6T
The 'bcpCounterTable' contains counter information as well as the following specific
entries:
•
bcpCounterTotalFeed
•
bcpCounterFeed
•
bcpCounterPrint
•
bcpCounterFeedCharge1
•
bcpCounterFeedCharge2
Note:
The SNMP function in some label printers can be activated and deactivated
separately in the LAN settings in the printer menu. The following must be activated:
B-SA, B-852, B-SX, B-EX
(Note: the unit of measurement is in cm!)
(Note: the unit of measurement is in inches!)
Page 26