Start-Up And Operation; Start-Up - ABB AquaMaster Explorer Installation Manual

4 START-UP AND OPERATION

Warning.
• The battery used in this device may present a risk of fire or chemical burns if mistreated. Do
not recharge, disassemble, heat above 100C or incinerate.
• Replace battery pack with an ABB supplied part only. Use of another battery may present a
risk of fire or explosion.
• Dispose of all battery packs promptly. Keep away from children.
• Dispose of battery packs in accordance with local regulations.
• Where possible, recycle used batteries.
• Contact the local environmental authority for further information regarding disposal or
recycling schemes for used batteries.
The AquaMaster transmitter is optionally supplied with a separate battery pack, but is not connected. To
connect, see Fig 4.1.
4.1 Start-up – Fig 4.1 and 4.2
Remove any plastic film from the AquaMaster light sensitive display window before commencing normal
operation.
When electrical power is connected, or the plastic film is removed from the display window with electrical
power connected, the AquaMaster performs a self-test operation. If successful, 'Pass' is indicated in the
display window.
If the display shows 'Err 1', check the sensor wiring. If the fault is rectified, the transmitter restarts
automatically.
If the display shows 'Err 2 or 3', contact ABB.
Fig. 4.1 Connecting Battery Pack
21