Table Of Contents; Introduction - ABB AquaMaster Explorer Installation Manual

CONTENTS
1 INTRODUCTION ......................................... 1
2 MECHANICAL INSTALLATION .................. 2
2.1 Unpacking .......................................... 2
2.2 Installation Conditions ........................ 2
2.3 Transmitter Dimensions ...................... 4
2.4 GSM-equipped Transmitters .............. 5
2.4.1 GSM Antenna Installation ....... 5
2.4.2 Connecting a Remote
Antenna ................................. 7
2.4.3 Installing a SIM Card .............. 8
3 ELECTRICAL INSTALLATION .................... 9
3.1 Bonding/Grounding ............................ 9
3.2 Connections ..................................... 14
3.2.1 Sensor Terminal Box
Connections (Remote Versions
only) ..................................... 14
3.2.2 Environmental Protection ...... 14
3.2.3 Transmitter Connections ............... 17
3.3.1 Frequency Outputs ............... 17
3.3.2 Alarm Interface ..................... 17
3.3.3 Connector Input/Output
Connections ........................ 18
3.3.4 Local Computer Connection 19
3.3.5 Pressure Transducer ............. 20
4 START-UP AND OPERATION .................. 21
4.1 Start-up ............................................ 21
4.2 Display Activation ............................. 22
4.3 Battery Replacement ........................ 22
4.4 Accessories/Spares Kits ................... 23
SPECIFICATION ............................................. 24
APPENDIX A - GSM-EQUIPPED UNITS -
SAFETY PRECAUTIONS ............................... 26
Safety Precautions .................................... 26
NOTES ............................................................ 27

1 INTRODUCTION

TM
AquaMaster is a range of high performance
electromagnetic flowmeters for the measurement
of electrically conductive fluids and are normally
supplied as factory
systems.
Warning.
• Installation and maintenance must
be carried out only by suitably trained
personnel.
• Read all relevant sections of this
manual before selecting a location.
• The safety requirements of this
equipment,
equipment and the local environment
must be taken into consideration
during installation.
• Install and use this equipment in
accordance with relevant national
and local standards.
• Specific safety precautions apply to
the use of the GSM engine which
forms part of the GSM-equipped
version of this product. If the unit
purchased has GSM-capability, read
Appendix A on page 24 before
selecting a location.
configured, calibrated
any associated
1